Walking Foot with Guide (Plastic Claw)

Walking Foot with Guide (Plastic Claw)
A walking or even feed foot for matching stripes and plaids, quilting or sewing difficult fabrics.
Price:
NZ$ 59.00
UOM:
Each
Or make 6 weekly interest free payments from $9.83
PFWFPLASTIC
1
Purchase Qty:
 
 

WALKING FOOT (EVEN FEED FOOT) with GUIDE

SCREW-ON FOOT

This Walking Foot (sometimes called an Even Feed Foot) is not as complicated as it looks!

It has a set of feed dogs which means that the top layer of fabric will feed through your machine at the same speed as the lower layer of fabric. This prevents that awkward situation where you end up with extra fabric at the end of your seam!

This version has a plastic claw where is screws onto the shank of the machine.

Used for:

  • Matching stripes & plaids
  • Quilting (an essential tool for quilting!) 
  • Topstitching

Fits most low shank machines (if your machine has a snap-on foot, simply remove the foot and then unscrew the adapter. Slide the walking foot onto the shaft, ensure that the foot's arm sits above the machine's needle screw and replace the screw to hold it in place).

For best results when quilting increase your stitch length to 3 or 4. If the foot is slipping try increasing the presser foot pressure on your machine. 

We also sell a Walking Foot with metal claw and guide.